General description
The FSVP532 is a highly integrated transceiver module for contactless
communication at 13.56 MHz based on the 80C51 microcontroller core. It supports 6
different operating modes:
◆ PIN2PIN compatiable PN532
◆ ISO/IEC 14443A/MIFARE Reader/Writer
◆ FeliCa Reader/Writer
◆ ISO/IEC 14443B Reader/Writer
◆ ISO/IEC 14443A/MIFARE Card MIFARE Classic 1K or MIFARE Classic 4K
card emulation mode
◆ FeliCa Card emulation
◆ ISO/IEC 18092, ECMA 340 Peer-to-Peer
The FSVP532 implements a demodulator and decoder for signals from ISO/IEC
14443A/MIFARE compatible cards and transponders. The FSVP532 handles the
complete ISO/IEC 14443A framing and error detection (Parity & CRC).
The FSVP532 supports MIFARE Classic 1K or MIFARE Classic 4K card
emulation mode. The FSVP532 supports contactless communication using MIFARE
Higher transfer speeds up to 424 kbit/s in both directions.
The FSVP532 can demodulate and decode FeliCa coded signals. The
FSVP532 handles the FeliCa framing and error detection. The FSVP532 supports
contactless communication using FeliCa Higher transfer speeds up to 424 kbit/s
in both directions.
The FSVP532 supports layers 2 and 3 of the ISO/IEC 14443 B Reader/Writer
communication scheme, except anticollision. This must be implemented in firmware
as well as upper layers.
In card emulation mode, the FSVP532 is able to answer to a Reader/Writer
command either according to the FeliCa or ISO/IEC 14443A/MIFARE card interface
scheme. The FSVP532 generates the load modulation signals, either from its
transmitter or from the LOADMOD pin driving an external active circuit. A complete
secure card functionality is only possible in combination with a secure IC using the
NFC-WI/S2C interface.
Compliant to ECMA 340 and ISO/IEC 18092 NFCIP-1 Passive and Active
communication modes, the FSVP532 offers the possibility to communicate to
another NFCIP-1 compliant device, at transfer speeds up to 424 kbit/s.The
FSVP532 handles the complete NFCIP-1 framing and error detection.
The FSVP532 transceiver can be connected to an external antenna forReader/Writer or Card/PICC modes, without any additional active component.
The FSVP532 supports the following host interfaces:
◆ SPI
◆ I2C
◆ High Speed UART (HSU)
An embedded low-dropout voltage regulator allows the device to be connected
directly to a battery. In addition, a power switch is included to supply power to a
secure IC