MAX14978ETO+

The MAX1497/MAX1499 low-power, 3.5- and 4.5-digit, analog-to-digital converters (ADCs) with integrated light emitting diode (LED) drivers operate from a single 2.7V to 5.25V power supply.
They include an internal reference, a high-accuracy on-chip oscillator, and a multiplexed LED display driver. An internal charge pump generates the negative supply needed to power the integrated input buffers for single-supply operation.
The ADC is configurable for either a ±2V or ±200mV input range and it outputs its conversion results to an LED and/or to a microcontroller (µC). Microcontroller communication is possible through an SPI™-/QSPI™-/MICROWIRE™-compatible serial interface.
The MAX1497 is a 3.5-digit (±1999 count) device and the MAX1499 is a 4.5-digit (±19,999 count) device.
Features
♦ High Resolution MAX1499: 4.5 Digits (±19,999 Count) MAX1497: 3.5 Digits (±1999 Count)
♦ Sigma-Delta ADC Architecture No Integrating Capacitors Required No Autozeroing Capacitors Required >100dB of Simultaneous 50Hz and 60Hz Rejection
♦ Operate from a Single 2.7V or 5.25V Supply
♦ Selectable Input Range of ±200mV or ±2V
♦ Selectable Voltage Reference: Internal 2.048V or External
♦ Internal High-Accuracy Oscillator Needs No External Components
♦ Automatic Offset Calibration
♦ Low Power (Exclude LED Driver Current) Maximum 664µA Operating Current Maximum 268µA Shutdown Current
♦ Small 32-Pin, 7mm x 7mm TQFP Package (4.5 Digits), 28-Pin SSOP Package (3.5 Digits)
♦ Also Available in a PDIP Package (3.5 Digits)
♦ Multiplexed LED Drivers Resistor-Programmable Segment Current
♦ SPI-/QSPI-/MICROWIRE-Compatible Serial Interface
♦ Extended Temperature Range (-40°C to +85°C)Applications Digital Panel Meters Hand-Held Meters Digital Voltmeters Digital Multimeters