TE Connectivity 7014PC-industrial Electro Pneumatic Timing Relay

On-Delay Time Delay Relay 4PDT (4 Form C) 2 Sec ~ 20 Sec Delay 10A @ 240VAC Panel Mount

 

 

Features

Available in on-delay, true off-delay, and on/off-delay.

Timing from 0.1 seconds to 60 minutes, in linear increments.

Oversize adjustment knobs, serrated with high-resolution markings visible from all angles makes the timer easy to set timers.

Inherent transient immunity.

Standard voltages from 6-550VAC and 12-550VDC (special voltages available).

Available in 2-pole or 4-pole models.

Numerous enclosure options — explosion proof, dust tight, watertight, hermetically-sealed, NEMA 1.

Auxiliary timed and instantaneous switches can be added for greater switching flexibility.

Many mounting options — Surface mount, Panel mount, Octal plug-in mounting.

Options: quick-connect terminals, dial stops, and transient protection module.

Easy-to-reach screw terminals, all on the face of the unit, clearly identified.

Modular assembly — timing head, coil assembly and switchblock are all individual modules, with switches field-replaceable

 

Design & Construction of 7000 Series

There are three main components of Series 7000 Timing Relays:

Timing Head: circulates air through a variable length to provide linearly adjustable timing. Patented design provides easy adjustment and long service life under severe operating conditions.

Precision-Wound Potted Coil: Total sealing without external leads eliminates moisture problems, gives maximum insulation value.

Snap-Action Switch Assembly: custom designed over-center mechanism provides snap action. Standard switches are DPDT arrangement.

Each of these subassemblies forms self-contained modules assembled at the factory with the other two to afford a wide choice of operating types, coil voltages, and timing ranges.

The squared design with front terminals and rear mounting permits the grouping of Series 7000 units side-by-side in minimum panel space. Auxiliary switches may be added in the base of the unit, without affecting the overall width or depth.

 

Operation

Two basic operating types are available.

“On-Delay” models provide a delay period on energization, at the end of which the switch transfers the load from one set of contacts to an other. De-energizing the unit during the delay period immediately recycles the unit, readying it for another full delay period on re-energization.

In "Off-Delay" models the switch transfers the load im mediately upon energization and the delay period does not begin until the unit is de energized. At the end of the delay period the switch returns to its original position. Re-en ergizing the unit during the delay period immediately resets the timing, readying it for another full delay period on de-energization.

No power is required during the timing period, providing a true off delay.

 

On-delay Model 7014

With the addition of an extra switch block at the bottom of the basic unit, this version offers four pole switch capacity with simultaneous timing or two-step timing. The two-step operation is achieved by factory adjustment to your specifications.

For two-step operation, a maximum timing ratio between upper and lower switches of 3:2 is recommended. Once adjust ed at the factory, this ratio remains constant regardless of changes in dial settings. (Ex: If upper switch transfer is set on dial at 60 sec., minimum time on lower switch should be 40 sec.)

This Series 7000 unit offers many of the performance features found in basic models — voltage ranges, timing and switch capacities.

Four pole models add approximately 1-1/4" to the maximum height of the basic model, approximately 1/8" to the depth. They are designed for vertical operation only.

 

7014PC Product Parameter

Manufacturer	TE Connectivity	Manufacturer's Part #	7014PC
Categories	Industrial Automation and Controls	Sub-Categories	Time Delay Relays
Part Status	Active	Relay Type	ON-DELAY RELAY
Factory Lead Time	14 Weeks	Published	2011
Termination Type	SCREW	Reference Standard	CE; CSA; FM; UL
Relay Action	MOMENTARY	Adjustable Time Delay-Min	2 s
Body Breadth	65.3 mm	Physical Dimension	114.8mm x 65.3mm x 71.9mm
Contact/Output Supply Type	AC	Adjustable Time Delay-Max	20 s
Body Height	71.9mm	Body Length or Diameter	114.8mm
Contact Voltage(AC)-Max	240V	Coil Voltage(DC)-Max	125V
Surface Mount	NO	Operating Temperature (Max)	75°C
Operating Temperature (Min)	-30°C	Contact Current(AC)-Max	10A
Mounting Feature	PANEL MOUNT	Relay Function	4PDT

 

7014PC Manufacturer

TE Connectivity is an American Swiss-domiciled technology company that designs and manufactures connectors and sensors for several industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy.