AMC1210IRHAT

Device Family Overview
The ProASICPLUS family of devices, Actel’s second generation family of flash FPGAs, offers enhanced performance over Actel’s ProASIC family. It combines the advantages of ASICs with the benefits of programmable devices through nonvolatile flash technology.
Features and Benefits High Capacity Commercial and Industrial
• 75,000 to 1 Million System Gates
• 27 K to 198 Kbits of Two-Port SRAM
• 66 to 712 User I/Os Military
• 300, 000 to 1 Million System Gates
• 72 K to 198 Kbits of Two Port SRAM
• 158 to 712 User I/OsReprogrammable Flash Technology
• 0.22 µm 4 LM Flash-Based CMOS Process
• Live At Power-Up (LAPU) Level 0 Support
• Single-Chip Solution
• No Configuration Device Required
• Retains Programmed Design during Power-Down/Up Cycles
• Mil/Aero Devices Operate over Full Military Temperature RangePerformance
• 3.3 V, 32-Bit PCI, up to 50 MHz (33 MHz over military temperature)
• Two Integrated PLLs
• External System Performance up to 150 MHzSecure Programming
•
The Industry’s Most Effective Security Key (FlashLock®)Low Power
• Low Impedance Flash Switches
• Segmented Hierarchical Routing Structure
• Small, Efficient, Configurable (Combinatorial or Sequential) Logic CellsHigh Performance Routing Hierarchy
• Ultra-Fast Local and Long-Line Network
• High-Speed Very Long-Line Network
• High-Performance, Low Skew, Splittable Global Network
• 100% Routability and UtilizationI/O
• Schmitt-Trigger Option on Every Input
• 2.5 V / 3.3 V Support with Individually-Selectable Voltage and Slew Rate
• Bidirectional Global I/Os
• Compliance with PCI Specification Revision 2.2
• Boundary-Scan Test IEEE Std. 1149.1 (JTAG) Compliant
• Pin-Compatible Packages across the ProASICPLUS FamilyUnique Clock Conditioning Circuitry
• PLL with Flexible Phase, Multiply/Divide, and Delay Capabilities
• Internal and/or External Dynamic PLL Configuration
• Two LVPECL Differential Pairs for Clock or Data InputsStandard FPGA and ASIC Design Flow
• Flexibility with Choice of Industry-Standard Front-End Tools
• Efficient Design through Front-End Timing and Gate OptimizationISP Support
• In-System Programming (ISP) via JTAG PortSRAMs and FIFOs
• SmartGen Netlist Generation Ensures Optimal Usage of Embedded Memory Blocks
• 24 SRAM and FIFO Configurations with Synchronous and Asynchronous Operation up to 150 MHz (typical)