CD4047BCM

The CD4047B is capable of operating in either the monostable or astable mode. It requires an external capacitor (between pins 1 and 3) and an external resistor (between pins 2 and 3) to determine the output pulse width in the monostable mode, and the output frequency in the astable mode.
Features
• Wide supply voltage range: 3.0V to 15V
• High noise immunity: 0.45 VDD (typ.)
• Low power TTL compatibility: Fan out of 2 driving 74L or 1 driving 74LSSpecial
Features
• Low power consumption: special CMOS oscillator configuration
• Monostable (one-shot) or astable (free-running) operation
• True and complemented buffered outputs
• Only one external R and C requiredMonostable Multivibrator
Features
• Positive- or negative-edge trigger
• Output pulse width independent of trigger pulse duration
• Retriggerable option for pulse width expansion
• Long pulse widths possible using small RC components by means of external counter provision
• Fast recovery time essentially independent of pulse width
• Pulse-width accuracy maintained at duty cycles approaching 100%Astable Multivibrator
Features
• Free-running or gatable operating modes
• 50% duty cycle
• Oscillator output available
• Good astable frequency stability typical= ±2% + 0.03%/°C @ 100 kHz frequency= ±0.5% + 0.015%/°C @ 10 kHz deviation (circuits trimmed to frequency VDD = 10V ±10%)Applications
• Frequency discriminators
• Timing circuits
• Time-delay applications
• Envelope detection
• Frequency multiplication
• Frequency division