DS1073Z-66

The DS1073 is a fixed-frequency oscillator requiring no external components for operation. Numerous operating frequencies are possible in the range of approximately 27.3kHz to 100MHz through the use of an on-chip programmable prescaler and divider.
The DS1073 features a master oscillator followed by a prescaler and then a programmable divider.
The prescaler and programmable divider are user-programmable with the desired values being stored in nonvolatile memory. This allows the user to buy an off the shelf component and program it on site prior to board production. Design changes can be accommodated on the fly by simply programming different values into the device (or reprogramming previously programmed devices).
The DS1073 is shipped from the factory configured for half the maximum operating frequency. Contact the factory for specially programmed devices. As alternatives to the onboard oscillator an external clock signal or a crystal may be used as a reference.
The choice of reference source (internal or external) is user-selectable at the time of programming (or on the fly if the SEL mode is chosen).
FEATURES
• Dual fixed-frequency outputs (30kHz to 100MHz)
• User-programmable on-chip dividers (from 1 to 513)
• User-programmable on-chip prescaler (1, 2, 4)
• No external components
• ±0.5% initial tolerance (commercial)
• ±1% variation over commercial temperature and voltage
• Internal clock, external clock or crystal reference options
• 2.7 to 3.6V supply
• Power-down mode
• Synchronous output gating
• Industrial temp operation with relaxed specifications