ICM7260IPE

GENERAL
The IS25LQ080 is 8 Mbit Serial Peripheral Interface (SPI) Flash memories, providing single-, dual or quad output.
The devices are designed to support a 33 MHz fclock rate in normal read mode, and 104 MHz in fast read (Quad output is 100MHz), the fastest in the industry.
The devices use a single low voltage power supply, ranging from 2.3 Volt to 3.6 Volt, to perform read, erase and program operations.
The devices can be programmed in standard EPROM programmers.
FEATURES
• Single Power Supply Operation - Low voltage range: 2.3 V - 3.6 V
• Memory Organization - IS25LQ080: 1024K x 8 (8 Mbit)
• Cost Effective Sector/Block Architecture - 8Mb : Uniform 4KByte sectors / sixteen uniform 64KByte blocks
• Serial Peripheral Interface (SPI) Compatible - Supports single-, dual- or quad-output - Supports SPI Modes 0 and 3 - Maximum 33 MHz clock rate for normal read - Maximum 104 MHz clock rate for fast read - Maximum 208MHz clock rate - Maximum 400MHz clock rate equivalent Quad SPI
• Byte Program Operation - Typical 10 us/Byte
• Page Program (up to 256 Bytes) Operation - Maximum 0.7ms per page program
• Sector, Block or Chip Erase Operation - Sector Erase (4KB)150ms (Typ) - Block Erase (64KB)500ms (Typ) - Chip Erase 2s (8Mb)
• Low Power Consumption - Max 12 mA active read current - Max 20 mA program/erase current - Max 30 uA standby current
• Hardware Write Protection - Protect and unprotect the device from write operation by Write Protect (WP#) Pin
• Software Write Protection -
The Block Protect (BP3, BP2, BP1, BP0) bits allow partial or entire memory to be configured as read-only
• High Product Endurance - Guaranteed 100,000 program/erase cycles per single sector - Minimum 20 years data retention
• Industrial Standard Pin-out and Package - 8-pin 208mil SOIC - 8-pin 150mil VVSOP - 8-contact WSON - PDIP - Lead-free (Pb-free) package
•Additional 256-byte Security information one-time programmable (OTP) area
•Special protect function - Safe guard function (Appendix 1) - Sector unlock function (Appendix 2)