LM5175PWPT

Description
The LM5165-Q1 device is a compact, easy-to-use, 3-V to 65-V, ultra-low IQ synchronous buck converter with high efficiency over wide input voltage and load current ranges. With integrated high-side and low-side power MOSFETs, up to 150-mA of output current can be delivered at fixed output voltages of 3.3 V or 5 V or at an adjustable output.
The converter is designed to simplify implementation while providing options to optimize the performance for the target application. Pulse Frequency Modulation (PFM) mode is selected for optimal light-load efficiency or Constant On-Time (COT) control for nearly constant operating frequency. Both control schemes do not require loop compensation while providing excellent line and load transient response and short PWM on-time for large step-down conversion ratios.
The high-side P-channel MOSFET can operate at 100% duty cycle for lowest dropout voltage and does not require a bootstrap capacitor for gate drive. Also, the current limit setpoint is adjustable to optimize inductor selection for a particular output current requirement. Selectable and adjustable start-up timing options include minimum delay (no soft start), internally fixed (900 µs), and externally programmable soft start using a capacitor. An open-drain PGOOD indicator can be used for sequencing, fault reporting, and output voltage monitoring.
The LM5165-Q1 is qualified to automotive AEC-Q100 grade 1 and is available in 10-pin VSON and VSSOP packages with 0.5-mm pin pitch.  
Features
• AEC-Q100 qualified for automotive applications– Device temperature grade 1: –40°C to 125°C ambient temperature range– Device HBM ESD classification level 2– Device CDM ESD classification level C5
• Wide input voltage range of 3 V to 65 V
• 10.5-µA no-load quiescent current
• –40°C to 150°C junction temperature range
• Fixed (3.3 V and 5 V) or adjustable output voltages
• Meets EN55022 / CISPR 22 EMI standards
• Integrated 2-Ω PMOS buck switch– Supports 100% duty cycle for low dropout
• Integrated 1-Ω NMOS synchronous rectifier– Eliminates external rectifier diode
• Programmable current limit setpoint (four levels)
• Selectable PFM or COT mode operation
• 1.223-V ±1% internal voltage reference
• 900-µs internal or programmable soft start
• Active slew rate control for low EMI
• Monotonic start-up into prebiased output
• No loop compensation or bootstrap components
• Precision enable and input UVLO with hysteresis
•
Thermal shutdown protection with hysteresis
• 10-pin VSON and VSSOP packages
• Use TPSM265R1 module for faster time to market
• Create a custom regulator design using WEBENCH® Power Designer   Applications
• Automotive and battery-powered equipment
• High-voltage LDO replacement
• General-purpose bias supplies