LMF100CIWMX/NOPB

Description
The LMF100 device consists of two independent general-purpose, high-performance switched capacitor filters. With an external clock and two to four resistors, each filter block can realize various second-order and first-order filtering functions. Each block has three outputs. One output can be configured to perform either an allpass, highpass, or notch function.
The other two outputs perform bandpass and lowpass functions.
The center frequency of each filter stage is tuned by using an external clock or a combination of a clock and resistor ratio. Up to a fourth-order biquadratic function can be realized with one LMF100. Higher order filters are implemented by simply cascading additional packages，and all the classical filters (such as Butterworth, Bessel, Elliptic, and Chebyshev) can be realized.
The LMF100 is fabricated on TI's high-performance analog silicon gate CMOS process, LMCMOS TM. This allows for the production of a very low-offset, high-frequency filter building block.
The LMF100 is pin- compatible with the industry standard MF10, but provides greatly improved performance.  
Features ●Wide 4-V to 15-V Power Supply Range●Operation up to 100 kHz●Low Offset Voltage:-Typically (50:1 or 100:1 mode):-Vos1=+5mV-Vos2=+15mV-Vos3= +15 mV●Low Crosstalk: - -60 dB●Clock to Center Frequency Ratio Accuracy +0.2% (Typical)●f0
*QRangeupto1.8MHz●Pin-Compatible With MF10   Applications ●Replacing Active RC Filters With Reduced Form Factors and Higher Accuracy and Tunabillity●An Alternative to Integrated Continuous Time Filters