MX25L3273EM2I-10G

GENERAL
The MX25L3205 is a CMOS 33,554,432 bit serial eLiteFlashTM Memory, which is configured as 4,194,304 x 8 internally.
The MX25L3205 features a serial peripheral interface and software protocol allowing operation on a simple 3- wire bus.
The three bus signals are a clock input (SCLK), a serial data input (SI), and a serial data output (SO). SPI access to the device is enabled by CS# input.
FEATURES GENERAL
• Serial Peripheral Interface (SPI) compatible -- Mode 0 and Mode 3
• 33,554,432 x 1 bit structure
• 64 Equal Sectors with 64K byte each - Any sector can be erased
• Single Power Supply Operation - 2.7 to 3.6 volt for read, erase, and program operations
• Latch-up protected to 100mA from -1V to Vcc +1V
• Low Vcc write inhibit is from 1.5V to 2.5V PERFORMANCE
• High Performance - Fast access time: 50MHz serial clock (30pF + 1TTL Load) - Fast program time: 3ms/page (typical, 256-byte per page) - Fast erase time: 1s/sector (typical, 64K-byte per sector) and 64s/chip (typical) - Acceleration mode: - Program time: 2.4ms/page (typical) - Erase time: 0.8s/sector (typical) and 51s/chip (typical)
• Low Power Consumption - Low active read current: 30mA (max.) at 50MHz - Low active programming current: 30mA (max.) - Low active erase current: 38mA (max.) - Low standby current: 50uA (max.) - Deep power-down mode 1uA (typical)
• Minimum 10K erase/program cycle for array
• Minimum 100K erase/program cycle for additional 4Kb