MX29LV320EBTI-70G

GENERAL MX29LV320E T/B is a 32Mbit flash memory that can be organized as 4Mbytes of 8 bits each or 2Mbytes of 16 bits each.
These devices operate over a voltage range of 2.7V to 3.6V typically using a 3V power supply input.
The memory array is divided into 64 equal 64 Kilo byte blocks. However, depending on the device being used as a Top-Boot or Bottom-Boot device, the top or the bottom frst block is further subdivided into 8 equal 8Kbyte blocks.
The outermost two sectors at the top or at the bottom can be protected at the boot blocks for this device. This flash memory also provides an additional factory lockable or customer lockable 256byte sector to provide security feature.
FEATURESGENERAL
FEATURES
• Byte/Word switchable - 4,194,304 x 8 / 2,097,152 x 16
• Sector Structure - 8K-Byte x 8 and 64K-Byte x 63
• Extra 256-Byte sector for security -
Features factory locked and identifable, and customer lockable
• Twenty-Four Sector Groups - Provides sector group protect function to prevent program or erase operation in the protected sector group - Provides chip unprotect function to allow code changing - Provides temporary sector group unprotect function for code changing in previously protected sector groups
• Power Supply Operation - Vcc 2.7 to 3.6 volt for read, erase, and program operations
• Latch-up protected to 100mA from -1V to 1.5 x Vcc
• Low Vcc write inhibit : Vcc ≤ Vlko
• Compatible with JEDEC standard - Pinout and software compatible to single power supply Flash
• Functional compatible with MX29LV320D T/B devicePERFORMANCE
• High Performance - Fast access time: 70ns - Fast program time: 11us/word typical utilizing accelerate function - Fast erase time: 0.7s/sector, 35s/chip (typical)
• Low Power Consumption - Low active read current: 10mA (typical) at 5MHz - Low standby current: 5uA (typical)
• Typical 100,000 erase/program cycle
• 20 years data retentionSOFTWARE
FEATURES
• Erase Suspend/ Erase Resume - Suspends sector erase operation to read data from or program data to another sector which is not being erased
• Status Reply - Data# Polling & Toggle bits provide detection of program and erase operation completion
• Support Common Flash Interface (CFI)HARDWARE
FEATURES
• Ready/Busy# (RY/BY#) Output - Provides a hardware method of detecting program and erase operation completion
• Hardware Reset (RESET#) Input - Provides a hardware method to reset the internal state machine to read mode
• WP#/ACC input pin - Provides accelerated program capabilityPACKAGE
• 44-Pin SOP
• 48-Pin TSOP
• 48-Ball TFBGA (6 x 8mm)
• 48-Ball LFBGA (6 x 8mm)
• All devices are RoHS Compliant & Halogen-free.