NCV7708ADWG

FlexRay® Bus DriverNCV7381 is a single−channel FlexRay bus driver compliant with the FlexRay Electrical Physical Layer Specification Rev. 3.0.1, capable of communicating at speeds of up to 10 Mbit/s. It provides differential transmit and receive capability between a wired FlexRay communication medium on one side and a protocol controller and a host on the other side.NCV7381 mode control functionality is optimized for nodes permanently connected to car battery.It offers excellent EMC and ESD performance.KEY
FEATURESGeneral
• Compliant with FlexRay Electrical Physical Layer Specification Rev 3.0.1
• FlexRay Transmitter and Receiver in Normal−power Modes for Communication up to 10 Mbit/s
• Support of 60 ns Bit Time
• FlexRay Low−power Mode Receiver for Remote Wakeup Detection
• Excellent Electromagnetic Susceptibility (EMS) Level over Full Frequency Range. Very Low Electromagnetic Emissions (EME)
• Bus Pins Protected against >10 kV System ESD Pulses
• Safe Behavior under Missing Supply or No Supply Conditions
• Interface Pins for a Protocol Controller and a Host (TxD, RxD, TxEN, RxEN, STBN, BGE, EN, ERRN)
• INH Output for Control of External Regulators
• Local Wakeup Pin WAKE
• TxEN Time−out
• BGE Feedback
• Supply Pins VBAT, VCC, VIO with Independent Voltage Ramp Up:
♦ VBAT Supply Parametrical Range from 5.5 V to 50 V
♦ VCC Supply Parametrical Range from 4.75 V to 5.25 V
♦ VIO Supply Parametrical Range from 2.3 V to 5.25 V
• Compatible with 14 V and 28 V Systems
• Operating Ambient Temperature −40°C to +125°C (TAMB_Class1)
• Junction Temperature Monitoring with Two Levels
• SSOP−16 Package
•
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS CompliantFlexRay Functional Classes
• Bus Driver Voltage Regulator Control
• Bus Driver
– Bus Guardian Interface
• Bus Driver Logic Level Adaptation
• Bus Driver Remote WakeupQuality
• NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable