NLV74HC4060ADR2G

14-Stage Binary Ripple Counter With OscillatorHigh−Performance Silicon−Gate CMOS
The MC74HC4060A is identical in pinout to the standard CMOS MC14060B.
The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs.This device consists of 14 master−slave flip−flops and an oscillator with a frequency that is controlled either by a crystal or by an RC circuit connected externally.
The output of each flip−flop feeds the next and the frequency at each output is half of that of the preceding one.
The state of the counter advances on the negative−going edge of the Osc In.
The active−high Reset is asynchronous and disables the oscillator to allow very low power consumption during stand−by operation.State changes of the Q outputs do not occur simultaneously because of internal ripple delays.
Therefore, decoded output signals are subject to decoding spikes and may have to be gated with Osc Out 2 of the HC4060A.
Features
• Output Drive Capability: 10 LSTTL Loads
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 2.0 to 6.0 V
• Low Input Current: 1 A
• High Noise Immunity Characteristic of CMOS Devices
• In Compliance With JEDEC Standard No. 7A Requirements
• Chip Complexity: 390 FETs or 97.5 Equivalent Gates
• NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable
•
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant