TLC59116IRHBR

Description
The TLC59116 is a 16-channel I2C bus-controlled LED driver intended for red/green/blue/amber (RGBA) color mixing and backlight applications. Each LED output has its own 8-bit resolution (256 step) fixed-frequency individual PWM controller that operates at 97 kHz and has a duty cycle that can be adjusted from 0% to 99.6%.  
Features ●16 LED Drivers (Each Output Programmable at Off, On, Programmable LED Brightness, or Programmable Group Dimming and Blinking Mixed With Individual LED Brightness)●16 Constant-Current Output Channels●256-Step (8-Bit) Linear Programmable Brightness Per LED Output Varying From Fully Off (Default) to Maximum Brightness Using a 97-kHz PWM Signal●256- Step Group Brightness Control Allows General Dimming [Using a 190-Hz PWM Signal From Fully Off to Maximum Brightness (Default)]●256- Step Group Blinking With Frequency Programmable From 24 Hz to 10.73 s and Duty Cycle From 0% to 99.6%●Four Hardware Address Pins Allow 14 TLC59116 Devices to Be Connected to Same 2C Bus● Four Software-Programmable 2C Bus Addresses (One LED Group Call Address and Three LED Sub Call Addresses) Allow Groups of Devices to Be Addressed at Same Time in Any Combination●Software Reset Feature (SWRST Call) Allows Device to Be Reset Through IC Bus●Up to 14 Possible Hardware-Adjustable Individual PC Bus Addresses Per Device, So That Each Device Can Be Programmed●Open-Load and Overtemperature Detection Mode to Detect Individual L ED Errors●Output State Change Programmable on Acknowledge or Stop Command to Update Outputs Byte-by-Byte or All at Same Time (Default to Change on Stop)●Output Current Adjusted Through an External Resistor●Constant Output Current Range: 5 mA to 120 mA Maximum Output Voltage: 17 V●25-MHz Internal Oscillator Requires No External Components●1-MHz Fast-mode Plus (FMT) Compatible I2C Bus Interface With 30-mA High-Drive Capability on SDA Output for Driving High Capacitive Buses Intermal Power-On Reset ●Internal Power-On Reset●Noise Filter on SCL and SDA Inputs●No Glitch on Power-Up●Active-Low Reset ●Supports Hot Insertion●Low Standby Current●3.3-V or 5-V Supply Voltage●5.5-V Tolerant Inputs●Offered in 28-Pin Thin Shrink Small-Outline Package (TSSOP) (PW) and 32-Pin Quad Flatpack No Lead (QFN)●-40 °C to 85℃ Operation   Applications ●Gaming●Small Signage●Industrial Equipment