TPL0102-100PWR

Description
The TPL0102 has two linear-taper digital potentiometers (DPOTs) with 256 wiper positions.Each potentiometer can be used as a three-terminal potentiometer or as a two-terminal rheostat.
The TPL0102-100 has an end-to-end resistance of 100 kΩ.
The TPL0102 has non-volatile memory (EEPROM) which can be used to store the wiper position. This is beneficial because the wiper position is stored even during power-off and is automatically reinstated after power-on.
The internal registers of the TPL0102 can be accessed using the I2C interface.
The TPL0102 is available in a 14-pin MicroQFN and 14-pin TSSOP package with a specified temperature range of –40°C to 85°C.
Features
• Two Potentiometers with 256-Position Resolution
• Non-volatile Memory Stores Wiper Settings
• 100 kΩ End-to-End Resistance (TPL0102-100)
• Fast Power-up Response Time to Wiper Setting: <100 µs
• ±0.5 LSB INL, ±0.25 LSB DNL (Voltage-Divider Mode)
• 4 ppm/°C Ratiometric Temperature Coefficient
• I2C-compatible Serial Interface
• 2.7 V to 5.5 V Single-Supply Operation
• ±2.25 V to ±2.75 V Dual-Supply Operation
• Operating Temperature Range from –40°C to 85°C
• Shutdown Mode
• ESD Performance Tested Per JESD 22– 2000-V Human Body Model (A114-B, Class II)– 1000-V Charged-Device Model (C101) Applications
• Adjustable Gain Amplifiers and Offset Trimming
• Adjustable Power Supplies
• Precision Calibration of Set Point Thresholds
• Sensor Trimming and Calibration
• Mechanical Potentiometer Replacement