TPS51220ARSNR

The TPS 534 thermopile sensor in TO 5 type housing employs a chip of 1.2 x 1.2 mm2 absorber size and a 30 kV thermistor as temperature reference.
The round window opening is equipped with a 5.5 µm longpass (standard) infrared filter.
The sensor shows a flat sensitivity characteristics over the wavelength. ► Large absorber size - high signal output ► Low temperature coefficient of sensitivity ►
Thermistor temperature reference included ► Applications in pyrometers, and - with additional infrared bandpass filters - in gas detectors   Description
The TPS51200 is a sink and source double data rate (DDR) termination regulator designed for low input voltage, low-cost, low-noise systems where space is limited.
The TPS51200 has a fast transient response and requires only 20 F of output capacitance.
The TPS51200 supports all power requirements for DDR, DDR2, DDR3, DDR3L, Low-Power DDR3 and DDR4 VTT bus termination as well as remote sensing.  
Features
• Input Voltage: Supports 2.5-V Rail and 3.3-V Rail
• VLDOIN Voltage Range: 1.1 V to 3.5 V
• Sink and Source Termination Regulator IncludesDroop Compensation
• Requires Minimum Output Capacitance of 20-μF(Typically 3 × 10-μF MLCCs) for MemoryTermination Applications (DDR)
• PGOOD to Monitor Output Regulation
• EN Input
• REFIN Input Allows for Flexible Input TrackingEither Directly or Through Resistor Divider
• Remote Sensing (VOSNS)
• ±10-mA Buffered Reference (REFOUT)
• Built-in Soft Start, UVLO, and OCL
•
Thermal Shutdown
• Supports DDR, DDR2, DDR3, DDR3L, LowPower DDR3, and DDR4 VTT Applications
• 10-Pin VSON Package With
Thermal Pad   Applications
• Memory Termination Regulator for DDR, DDR2,DDR3, DDR3L, Low-Power DDR3 and DDR4
• Notebooks, Desktops, and Servers
• Telecom and Datacom
• Base Stations
• LCD-TVs and PDP-TVs
• Copiers and Printers
• Set-Top Boxes