TS3USB221ARSER

Description
The TS3USB221A device is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB l/Os.
The wide bandwidth (900 MHz) of this switch allows signals to pass with minimum edge and phase distortion.
The device multiplexes differential outputs from a USB host device to one of two corresponding outputs.
The switch is bidirectional and offers itte or no attenuation of the high-speed signals at the outputs.
The device also has a low power mode that will reduce the power consumtion to 1 μA for portible applications with a battery or limited power budget.
The device is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps).
The TS3USB221A device integrates ESD protection cells on all pins, is available in a tiny μQFN package (2 mm x 1.5 mm) and is characterized over the free air temperature range from - 40°C to 85°C.  
Features ●Vcc Operation at 2.5 V to 3.3 V●VI/O Accepts Signals Up to 5.5 V●1.8-V Compatible Control-Pin Inputs●Low-Power Mode When OE Is Disabled (1 μA)●RoN= 6 Q Maximum●ΔRoN = 0.2 Q TypicalCio(on)= 6 pF Typical●Low Power Consumption (30 μA Maximum)●High Bandwidth (900 MHz Typical)●Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ●ESD Performance Tested Per JESD 22- 7000-V Human-Body Model (A114-B, Class I)- 1000-V Charged-Device Model (C101) ●ESD Performance /O to GND- 12-KV Human-Body Model    Applications ●Routes Signals for USB 1.0, 1.1, and 2.0●Mobile Phones●Cameras●Notebooks●USB l/O expansion