TXB0104RUTR

Description
The TXS0104EPWR is a 4-bit Bidirectional Voltage-level Shifter for open-drain and push-pull applications. This non-inverting translator uses two separate configurable power-supply rails.
The A port is designed to track VCCA and accepts any supply voltage from 1.65 to 3.6V. VCCA must be less than or equal to VCCB.
The B port is designed to track VCCB and accepts any supply voltage from 2.3 to 5.5V. This allows for universal low-voltage bidirectional translation between any of the 1.2, 1.5, 1.8, 2.5, 3.3 and 5V voltage nodes. When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.
The TXS0104E is designed so that the OE input circuit is supplied by VCCA. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor.
The minimum value of the resistor is determined by the current-sourcing capability of the driver.
Features No direction-control signal neededMaximum data rates (24Mbps (push pull), 2Mbps (open drain))1.65 to 3.6V on A port and 2.3 to 5.5V on B port (VCCA <= VCCB)No power-supply sequencing required, either VCCA or VCCB can be ramped firstLatch-up performance exceeds 100mA per JESD 78, class IIGreen product and no Sb/Br Application
• Voltage diversion
• A/D conversion
• Reference voltage
• Matching resistors
• Parametric control