MX25U6435EM2I-10G

GENERAL
The MX29LV040C is a 4-mega bit Flash memory organized as 512K bytes of 8 bits. MXICs Flash memories offer the most cost-effective and reliable read/write nonvolatile random access memory.
The MX29LV040C is packaged in 32-pin PLCC and TSOP. It is designed to be reprogrammed and erased in system or in standard EPROM programmers.
FEATURES
• Extended single - supply voltage range 2.7V to 3.6V
• 524,288 x 8 only
• Single power supply operation - 3.0V only operation for read, erase and program operation
• Fully compatible with MX29LV040 device
• Fast access time: 55R/70/90ns
• Low power consumption - 30mA maximum active current - 0.2uA typical standby current
• Command register architecture - 8 equal sector of 64K-Byte each - Byte Programming (9us typical) - Sector Erase (Sector structure 64K-Byte x8)
• Auto Erase (chip & sector) and Auto Program - Automatically erase any combination of sectors with Erase Suspend capability. - Automatically program and verify data at specified address
• Erase suspend/Erase Resume - Suspends sector erase operation to read data from, or program data to, any sector that is not being erased, then resumes the erase.
• Status Reply - Data# Polling & Toggle bit for detection of program and erase operation completion.
• Sector protection - Hardware method to disable any combination of sectors from program or erase operations - Any combination of sectors can be erased with erase suspend/resume function
• CFI (Common Flash Interface) compliant - Flash device parameters stored on the device and provide the host system to access
• 100,000 minimum erase/program cycles
• Latch-up protected to 100mA from -1V to VCC+1V
• Package type: - 32-pin PLCC - 32-pin TSOP - All Pb-free devices are RoHS Compliant
• Compatibility with JEDEC standard - Pinout and software compatible with single-power supply Flash
• 20 years data retention